Tipping Material for Underwires and Boning
75 SEK per package
Cut off your wire and want an end that looks the same as before the cut?
Then this is the material for you.
- The colours on the screen do not always resemble the real colour and can look different from device to device. Unsurten of the colour as for a sample.
- Secure payment by card
- Questions? Email us!
- During a Sale is our packing time longer than ususal, normal is 2-4 workingdays, after Lucia Sale packing is 15-20 wotkingdays!
- Don't leave a message about fast delivery on your order, send a separate email please
- BrandB,Wear
- Country of originUnited States
Description
Article no.: TippmaterialBygelLarge
This tipping material must utilize concentrated heat with a heat gun. A hair drier blows too much air to work.
1 - To use this material, first shake container up to fluff up the powder.
2 - Concentrate the heat gun for 30 seconds on each side of the end.
3 - Dip into the powder and move around.
4 - Remove the end and apply the heat gun to the end again, melting the powder for a smooth finish.
One coat should work. If its applied too thick, use a file and file down the bulk. To re-smooth after filing, use the heat gun again to remelt the outside edge.
Material is a polyester based product